Important note :
This minimod will not be updated in this thread anymore, further updates will only be found in the minimod collection for 40k/Rosigma : https://openxcom.old.mod.io/minimods-collection-for-40k-and-rosigmahttps://openxcom.org/forum/index.php/topic,11058.0.htmlthe 40K megamod (with or without the Rosigma expansion) replace the difficulty selection by factions.
And by default set the difficulty to 0 (that is equal to Beginner difficulty)
But in the same time it will set the difficultyCoefficient for all difficulties to 2 , forcing then game to run on the Veteran difficulty coefficients
The difficulty coefficients are affecting these
So here are some minimods that allow you to change the difficulty level (setting both the coefficients and aim/armor multipliers to match the difficulty level of choice) in case you find 40K too easy or too hard.
How to Install
---------------
You must have installed the 40K megamod (any version) , you can optionally install the Rosigma expansion, the minimods are compatible with both.
Download
BegDifficulty40k.zip
ExpDifficulty40k.zip
GenDifficulty40k.zip
SupDifficulty40k.zip
that are attached to this post.
Open them, take and move the folders
"BeginnerDifficulty40k"
"ExperiencedDifficulty40k"
"GeniusDifficulty40k"
"SuperhumanDifficulty40k"
to ...\OpenXCOMDirectory\User\mods\
or your
C:\USER\YourUserName\Documents\OpenXcom\mods\
The 4 minimods will be available to enable or disable in the 40k (with or without Rosigma) main menu "Mods".
Enable your prefered one by setting it to "YES" (note : they're not incompatible if you enable both, but the one in last will be the one overriding them if for some reason you enable them all)
NOTE : if you find the game too hard or too easy after enabling one of those difficulty minimod, you can go back to the main menu, disable the minimod, enable another one harder or easier (or disable them all to revert to the default 40k setting that is Veteran).