Messages

1

Troubleshooting / Re: (l)ubuntu compile conniptions and a (sad) wine

« on: June 17, 2014, 04:33:16 pm »

Just so you know. Copying all the bin data from ~/OpenXcom/bin/data and putting it into my ~/.local/share/openxcom/data fixed the problem. Awesome! Time to give it  a whirl!

2

Troubleshooting / Re: (l)ubuntu compile conniptions and a (sad) wine

« on: June 17, 2014, 10:42:26 am »

Code: [Select]

C:\GAMES\OPENXCOMopenxcom
ERRORS: Failed to open direcdtory: SoldierName/
Make sure you have installed OpenXcom correctly.
Check the wiki documentation for more details.But... but... I did install it correctly. Made sure my ufo1 directory was patched up to 1.2, then 1.4. Then selected all the directories specified in wiki under install and copied them over into ~/OpenXcom/bin/data.... SoldierName is there... Full of its files...

I seem to be getting this error as well. So you aren't  alone.

3

Troubleshooting / Re: Error (probably user) in ./configure during debian compile.

« on: June 17, 2014, 10:33:07 am »

I fixed that problem I just had to remove the libyaml-cpp0.3 package. Silly me >.< Thanks for you help thus far!

4

Troubleshooting / Re: Error (probably user) in ./configure during debian compile.

« on: June 17, 2014, 10:27:57 am »

I had to do sudo make install.
This was displayed.

Code: [Select]

[ 74%] Built target yaml-cpp
[ 92%] Built target run-tests
[ 94%] Built target parse
[ 97%] Built target read
[100%] Built target sandbox
Install the project...
-- Install configuration: "Release"
-- Installing: /usr/local/lib/libyaml-cpp.so.0.5.1
-- Installing: /usr/local/lib/libyaml-cpp.so.0.5
-- Installing: /usr/local/lib/libyaml-cpp.so
-- Installing: /usr/local/include/yaml-cpp
-- Installing: /usr/local/include/yaml-cpp/mark.h
-- Installing: /usr/local/include/yaml-cpp/yaml.h
-- Installing: /usr/local/include/yaml-cpp/node
-- Installing: /usr/local/include/yaml-cpp/node/ptr.h
-- Installing: /usr/local/include/yaml-cpp/node/parse.h
-- Installing: /usr/local/include/yaml-cpp/node/type.h
-- Installing: /usr/local/include/yaml-cpp/node/detail
-- Installing: /usr/local/include/yaml-cpp/node/detail/node_data.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/node.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/node_ref.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/iterator_fwd.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/memory.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/iterator.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/bool_type.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/node_iterator.h
-- Installing: /usr/local/include/yaml-cpp/node/detail/impl.h
-- Installing: /usr/local/include/yaml-cpp/node/node.h
-- Installing: /usr/local/include/yaml-cpp/node/emit.h
-- Installing: /usr/local/include/yaml-cpp/node/convert.h
-- Installing: /usr/local/include/yaml-cpp/node/iterator.h
-- Installing: /usr/local/include/yaml-cpp/node/impl.h
-- Installing: /usr/local/include/yaml-cpp/eventhandler.h
-- Installing: /usr/local/include/yaml-cpp/null.h
-- Installing: /usr/local/include/yaml-cpp/dll.h
-- Installing: /usr/local/include/yaml-cpp/emitter.h
-- Installing: /usr/local/include/yaml-cpp/anchor.h
-- Installing: /usr/local/include/yaml-cpp/traits.h
-- Installing: /usr/local/include/yaml-cpp/noncopyable.h
-- Installing: /usr/local/include/yaml-cpp/parser.h
-- Installing: /usr/local/include/yaml-cpp/contrib
-- Installing: /usr/local/include/yaml-cpp/contrib/graphbuilder.h
-- Installing: /usr/local/include/yaml-cpp/contrib/anchordict.h
-- Installing: /usr/local/include/yaml-cpp/emitterdef.h
-- Installing: /usr/local/include/yaml-cpp/binary.h
-- Installing: /usr/local/include/yaml-cpp/emitfromevents.h
-- Installing: /usr/local/include/yaml-cpp/exceptions.h
-- Installing: /usr/local/include/yaml-cpp/ostream_wrapper.h
-- Installing: /usr/local/include/yaml-cpp/emittermanip.h
-- Installing: /usr/local/include/yaml-cpp/stlemitter.h
-- Installing: /usr/local/lib/pkgconfig/yaml-cpp.pc

5

Troubleshooting / Re: Error (probably user) in ./configure during debian compile.

« on: June 16, 2014, 11:11:32 pm »

I finished compiling correctly (I think) but running ./openxcom from the ~/OpenXcom directory gives me this error...

Code: [Select]

./openxcom: error while loading shared libraries: libyaml-cpp.so.0.5: cannot open shared object file: No such file or directory
Thanks for helping with this.

6

Troubleshooting / Re: Error (probably user) in ./configure during debian compile.

« on: June 16, 2014, 08:43:15 pm »

Awesome! Very helpful, I want to hit myself in the head for missing it!

I got a bit further gain and ran into this snag.

Code: [Select]

configure: error: Package requirements (yaml-cpp >= 0.5.0) were not met:

Requested 'yaml-cpp >= 0.5.0' but version of Yaml-cpp is 0.3.0

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables YAML_CFLAGS
and YAML_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

It seems my wheezy repository is limited to libyaml-cpp0.3

Any suggestions? You all have been super patient with me. I sure appreciate it.

7

Troubleshooting / Re: Error (probably user) in ./configure during debian compile.

« on: June 16, 2014, 07:51:28 pm »

Thanks for your time and responses... I certainly appreciate it. I did as you said and tried to go a bit further on my own before getting stuck again. I'm such a goof.

Code: [Select]

configure: error: Package requirements (sdl >= 1.2.13 SDL_mixer >= 1.2.11 SDL_gfx >= 2.0.22 SDL_image >= 1.2) were not met:

No package 'SDL_mixer' found
No package 'SDL_image' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables SDL_CFLAGS
and SDL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

I tried

Code: [Select]

apt-cache search sdl mixerand instaling the libsdl-mixer1.2 that I found but I still get the same error as above.

Any suggestions?

8

Troubleshooting / Error (probably user) in ./configure during debian compile.

« on: June 16, 2014, 03:40:08 pm »

Hey! I love what all of you are striving for and I want to thank you for what you have done so far.

I'm trying to compile OpenXcom 1.0 in Debian Wheezy, I seem to have run into an error during the ./configure step.

Code: [Select]

checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
checking for CC... no
checking for cxx... no
checking for cc++... no
checking for cl.exe... no
checking for FCC... no
checking for KCC... no
checking for RCC... no
checking for xlC_r... no
checking for xlC... no
checking whether the C++ compiler works... no
configure: error: in `/home/fertig/OpenXcom':
configure: error: C++ compiler cannot create executables
See `config.log' for more details

Here is config.log

Code: [Select]

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by openxcom configure 1.0.0, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ ./configure

## --------- ##
## Platform. ##
## --------- ##

hostname = debian
uname -m = i686
uname -r = 3.2.0-4-686-pae
uname -s = Linux
uname -v = #1 SMP Debian 3.2.57-3+deb7u1

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/games
PATH: /usr/games


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2309: checking for a BSD-compatible install
configure:2377: result: /usr/bin/install -c
configure:2388: checking whether build environment is sane
configure:2438: result: yes
configure:2579: checking for a thread-safe mkdir -p
configure:2618: result: /bin/mkdir -p
configure:2631: checking for gawk
configure:2661: result: no
configure:2631: checking for mawk
configure:2647: found /usr/bin/mawk
configure:2658: result: mawk
configure:2669: checking whether make sets $(MAKE)
configure:2691: result: yes
configure:2782: checking whether make supports nested variables
configure:2799: result: yes
configure:2878: checking for g++
configure:2908: result: no
configure:2878: checking for c++
configure:2908: result: no
configure:2878: checking for gpp
configure:2908: result: no
configure:2878: checking for aCC
configure:2908: result: no
configure:2878: checking for CC
configure:2908: result: no
configure:2878: checking for cxx
configure:2908: result: no
configure:2878: checking for cc++
configure:2908: result: no
configure:2878: checking for cl.exe
configure:2908: result: no
configure:2878: checking for FCC
configure:2908: result: no
configure:2878: checking for KCC
configure:2908: result: no
configure:2878: checking for RCC
configure:2908: result: no
configure:2878: checking for xlC_r
configure:2908: result: no
configure:2878: checking for xlC
configure:2908: result: no
configure:2932: checking for C++ compiler version
configure:2941: g++ --version >&5
./configure: line 2943: g++: command not found
configure:2952: $? = 127
configure:2941: g++ -v >&5
./configure: line 2943: g++: command not found
configure:2952: $? = 127
configure:2941: g++ -V >&5
./configure: line 2943: g++: command not found
configure:2952: $? = 127
configure:2941: g++ -qversion >&5
./configure: line 2943: g++: command not found
configure:2952: $? = 127
configure:2972: checking whether the C++ compiler works
configure:2994: g++    conftest.cpp  >&5
./configure: line 2996: g++: command not found
configure:2998: $? = 127
configure:3036: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "openxcom"
| #define PACKAGE_TARNAME "openxcom"
| #define PACKAGE_VERSION "1.0.0"
| #define PACKAGE_STRING "openxcom 1.0.0"
| #define PACKAGE_BUGREPORT "https://github.com/SupSuper/OpenXcom/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "openxcom"
| #define VERSION "1.0.0"
| /* end confdefs.h.  */
|
| int
| main ()
| {
|
|   ;
|   return 0;
| }
configure:3041: error: in `/home/fertig/OpenXcom':
configure:3043: error: C++ compiler cannot create executables
See `config.log' for more details

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_GL_CFLAGS_set=
ac_cv_env_GL_CFLAGS_value=
ac_cv_env_GL_LIBS_set=
ac_cv_env_GL_LIBS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_SDL_CFLAGS_set=
ac_cv_env_SDL_CFLAGS_value=
ac_cv_env_SDL_LIBS_set=
ac_cv_env_SDL_LIBS_value=
ac_cv_env_XMKMF_set=
ac_cv_env_XMKMF_value=
ac_cv_env_YAML_CFLAGS_set=
ac_cv_env_YAML_CFLAGS_value=
ac_cv_env_YAML_LIBS_set=
ac_cv_env_YAML_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=mawk
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /home/fertig/OpenXcom/missing --run aclocal-1.11'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='0'
AM_V='$(V)'
AUTOCONF='${SHELL} /home/fertig/OpenXcom/missing --run autoconf'
AUTOHEADER='${SHELL} /home/fertig/OpenXcom/missing --run autoheader'
AUTOMAKE='${SHELL} /home/fertig/OpenXcom/missing --run automake-1.11'
AWK='mawk'
CC=''
CCDEPMODE=''
CFLAGS=''
CPP=''
CPPFLAGS=''
CXX='g++'
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS=''
CYGPATH_W='echo'
DEBUG_CFLAGS=''
DEFS=''
DEPDIR=''
DOXYGEN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GL_CFLAGS=''
GL_LDFLAGS=''
GL_LIBS=''
GREP=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LDFLAGS=''
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/fertig/OpenXcom/missing --run makeinfo'
MKDIR_P='/bin/mkdir -p'
OBJEXT=''
PACKAGE='openxcom'
PACKAGE_BUGREPORT='https://github.com/SupSuper/OpenXcom/issues'
PACKAGE_NAME='openxcom'
PACKAGE_STRING='openxcom 1.0.0'
PACKAGE_TARNAME='openxcom'
PACKAGE_URL=''
PACKAGE_VERSION='1.0.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
SDL_CFLAGS=''
SDL_LIBS=''
SET_MAKE=''
SHELL='/bin/bash'
STRIP=''
VERSION='1.0.0'
WITH_OPENXCOM_DOCS_FALSE=''
WITH_OPENXCOM_DOCS_TRUE=''
WITH_OPENXCOM_MAN_FALSE=''
WITH_OPENXCOM_MAN_TRUE=''
XMKMF=''
XMLTO=''
X_CFLAGS=''
X_EXTRA_LIBS=''
X_LIBS=''
X_PRE_LIBS=''
YAML_CFLAGS=''
YAML_LIBS=''
ac_ct_CC=''
ac_ct_CXX=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=''
am__leading_dot='.'
am__nodep=''
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/fertig/OpenXcom/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME "openxcom"
#define PACKAGE_TARNAME "openxcom"
#define PACKAGE_VERSION "1.0.0"
#define PACKAGE_STRING "openxcom 1.0.0"
#define PACKAGE_BUGREPORT "https://github.com/SupSuper/OpenXcom/issues"
#define PACKAGE_URL ""
#define PACKAGE "openxcom"
#define VERSION "1.0.0"

configure: exit 77

Thanks in advance!